Polyaniline films doped with zinc salts and their properties

It has been found that thin polyaniline films doped with several zinc salts in solutions at pH 5.5 become electroconductive and electroactive in neutral aqueous electrolytes. The shape of the voltammetric characteristics depends on the initial state of the film. The effect of secondary doping withm-cresol is observed for polyaniline complexes with zinc salt of camphorsulfonic acid.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1450–1452, June, 1996.     

Modulated differential scanning calorimetry in the glass transition region

Temperature-modulated calorimetry (TMC) allows the experimental evaluation of the kinetic parameters of the glass transition from quasi-isothermal experiments. In this paper, model calculations based on experimental data are presented for the total and reversing apparent heat capacities on heating and cooling through the glass transition region as a function of heating rate and modulation frequency for the modulated differential scanning calorimeter (MDSC). Amorphous poly(ethylene terephthalate) (PET) is used as the example polymer and a simple first-order kinetics is fitted to the data. The total heat flow carries the hysteresis information (enthalpy relaxation, thermal history) and indications of changes in modulation frequency due to the glass transition. The reversing heat flow permits the assessment of the first and higher harmonics of the apparent heat capacities. The computations are carried out by numerical integrations with up to 5000 steps. Comparisons of the calculations with experiments are possible. As one moves further from equilibrium, i.e. the liquid state, cooperative kinetics must be used to match model and experiment.On leave from Toray Industries, Inc., Otsu, Shiga 520, Japan.This work was supported by the Division of Materials Research, National Science Foundation, Polymers Program, Grant # DMR 90-00520 and the Division of Materials Sciences, Office of Basic Energy Sciences, U. S. Department of Energy at Oak Ridge National Laboratory, managed by Lockheed Martin Energy Research Corp. for the U. S. Department of Energy, under contract number DE-AC05-96OR22464. Support for instrumentation came from TA Instruments, Inc. Research support was also given by ICI Paints, and Toray Industries, Inc.     

氢离子辐照纯钒中形成的位错环

钒合金作为聚变堆候选材料, 其辐照损伤行为一直是关注的重点. 研究辐照时形成的位错环的性质, 其意义在于揭示纯钒中辐照空洞的长大机理. 这种机理表现为不同类型位错环对点缺陷吸收的偏压不同, 从而影响金属的辐照肿胀. 本文利用加速器对纯钒薄膜样品进行氢离子辐照, 然后, 利用透射电镜的inside-outside方法分析氢离子辐照所形成的位错环的类型. 结果表明, 在氢离子辐照纯钒中没有发现柏氏矢量b=<110>的位错环, 只有柏氏矢量b=1/2<111>和b=<110>的位错环, 这两种位错环的惯性面处于{110}-{112}之间. 能确定性质的位错环全部为间隙型位错环, 未发现空位型位错环.     

Covalently Attached Liquids: Instant Omniphobic Surfaces with Unprecedented Repellency

Recent strategies to prepare “omniphobic” surfaces have demonstrated that minimizing contact angle hysteresis (CAH) is the key criterion for effectiveness. CAH is affected by chemistry and topography defects at the molecular and higher levels, thus most surfaces exhibit significant CAH. Preparative methods for stable coatings on smooth substrates with negligible CAH (<2°) for a broad range of liquids have not been reported. In this work, we describe a simple and rapid procedure to prepare omniphobic surfaces that are stable under pressure and durable at elevated temperatures. Consistent with theory, they exhibit sliding angles that decrease with liquid surface tension. Slippery omniphobic covalently attached liquid (SOCAL) surfaces are obtained through acid‐catalyzed graft polycondensation of dimethyldimethoxysilane. The smooth, stable, and temperature‐resistant coatings show extremely low CAH (≤1°) and low sliding angles for liquids that span surface tensions from 78.2 to 18.4 mN m^?1.     

Giant Hysteretic Sorption of CO2: In Situ Crystallographic Visualization of Guest Binding within a Breathing Framework at 298 K

A dynamic Zn^II‐MOF has been shown to exhibit extreme breathing behavior under gas pressure. The very narrow pore form of the activated framework opens up in the presence of carbon dioxide, thus making it a suitable material for CO₂ capture. Sorption of CO₂ at 298 K and relatively high pressure clearly shows a two‐step isotherm with giant hysteresis for the second step. In‐situ single‐crystal diffraction analysis was carried out under CO₂ gas pressure at 298 K using an environmental gas cell in order to visualize the interaction between CO₂ and the host framework. The results are well supported by pressure‐gradient differential scanning calorimetry (P‐DSC) and variable‐pressure powder X‐ray analysis. Theoretical calculations have been carried out in order to further back up the crystallographic data.     

Critical points in the Bragg glass phase of a weakly pinned crystal of Ca3Rh4Sn13

New experimental data are presented on the scan rate dependence of the magnetization hysteresis width ΔM(H) (∞ critical current densityJ _c(H)) in isothermalMH scans in a weakly pinned single crystal of Ca₃Rh₄Sn₁₃, which displays second magnetization peak (SMP) anomaly as distinct from the peak effect (PE). We observe an interesting modulation in the field dependence of a parameter which purports to measure the dynamical annealing of the disordered bundles of vortices injected through the sample edges towards the destined equilibrium vortex state at a givenH. These data, in conjunction with the earlier observations made while studying the thermomagnetic history dependence inJ _c(H) in the tracing of the minor hysteresis loops, imply that the partially disordered state heals towards the more ordered state between the peak field of the SMP anomaly and the onset field of the PE. The vortex phase diagram in the given crystal of Ca₃Rh₄Sn₁₃ has been updated in the context of the notion of the phase coexistence of the ordered and disordered regions between the onset field of the SMP anomaly and the spinodal line located just prior to the irreversibility line. A multi-critical point and a critical point in the (H,T) region of the Bragg glass phase have been marked in this phase diagram and the observed behavior is discussed in the light of recent data on multi-critical point in the vortex phase diagram in a single crystal of Nb.     

Contact angle hysteresis of liquid drops as means to measure adhesive energy of zein on solid substrates

Adhesion of zein to solid substrates has been studied using surface energy profiles as indices and by adhesion mapping using atomic force microscopy (AFM). Different plasticizers like glycerol and sorbitol have been used to form mixed films with zein and properties of these films are studied using surface energy profiles. Comparison of the results from the different mixed samples with those from the pure zein films showed that force mapping could identify areas rich in protein. The adhesion maps produced were deconvoluted from sample topography and contrasted with the data obtained from contact angle measurements. A comparison of the two methods shows that the extent of contact angle hysteresis is indicative of both hydrophobicity of the surface as well as the force of adhesion. Mechanical properties and microstructure of zein films prepared by casting from solutions and using Langmuir-Blodgett film technique have been investigated. Pure zein seemed brittle and exhibited an essentially linear relationship between stress and strain. Films with plasticizer were tougher than these films. In general, mixed films showed better mechanical properties than pure films and had higher ultimate tensile strength and increased per cent elongation. Further, the mixed films of zein showed a higher force of adhesion compared to the pure films.     

Thermomagnetic hysteresis and electrical transport in amorphous films

We report resistivity and magnetization measurements on an amorphous Ni₇₄Mn₂₄Pt₂ thin film in the temperature range of 3–300 K. Two significant features are apparent in both the magnetic susceptibility and electrical resistivity. A low-temperature (low-T) anomaly is observed at about 40 K, where a cusp appears in the resistivity, while a concomitant step-like increase in zero-field-cooled (ZFC) magnetization (M) appears with increasing temperature. The low-T anomaly is attributed to a crossover from a pure re-entrant spin-glass within individual domains to a mixed ferro-spin-glass regime at lower temperatures. By contrast, the high-temperature (high-T) anomaly, signaled by the appearance of hysteresis below 250 K, corresponds to the freezing of transverse spins in individual domains acting independently. Between the low-T and high-T anomalies a small but discernable magnetic hysteresis is observed for warming vs. cooling in the field-cooled (FC) case. This behavior clearly indicates the presence of domain structure in the sample, while the disappearance of this hysteresis at lower temperatures indicates the complete freezing of the spin orientation of these domains. According to these results, we have divided the magnetic state of this sample into three regions: at temperatures above 250 K, the sample behaves like a soft ferromagnet, exhibiting M vs. H loops with very small hysteresis (less than 5 Oe). As the temperature is lowered into the intermediate region (the range 40–250 K), spins become frozen randomly and progressively within the individual domains. These domains behave independently, rather than as a cooperative behavior of the sample. Weak irreversibility sets in, indicating the onset of transverse spin freezing within the domains. At temperatures below 40 K, the M vs. H loops exhibit larger hysteresis, for both the ZFC and FC cases, as in a pure spin-glass. We have also demonstrated giant noise in the resistivity at temperatures just below 250 K. Such noise can originate from fluctuations of the domains near the film surface because of competing effective bulk and surface anisotropy fields. The large observed amplitude may be explained by means of a large ferromagnetic anisotropy in the resistivity due to the large spin–orbit effect seen in NiMn systems. Finally, the low-T peak in the resistivity has been analyzed using Fisher and Langer's expression based on the Friedel Model proposed for critical transitions in transition metals (s–d systems). The fitted results are in satisfactory agreement with the predictions of this model.